Cope & Pattern (6 cutter sets)

Versatile and easy-to-use. These 6 cutter sets are designed to perform the 3 functions shown. Our standard sets cut 1/4” wide x 3/8” deep tongue and groove. Our common minor diameter requires NO fence adjustment when changing from cope to pattern cuts (3/8” tongue only). Counterclockwise rotation with wood fed face down.

Double Sided Cope & Pattern (6 cutter sets)

Standard sets cut 1/4” wide x 3/8” deep tongue and groove. For optional tongue and groove cutters and eased edge option, see Center Groover Sets and Optional Eased Edge Sets.

Center Groover Sets (2 piece sets)

Profile Cutters Not Included. At time of purchase, you may substitute the following tongue & groove cutters for the standard tongue & groove cutters in your cope & pattern set, at no additional charge. If you choose an optional center groover set, you will be unable to do the tongue & groove option Available on all M-50 and P-10 series cope & patterns. Diameters will no longer be the same, requiring fence adjustments between cuts.

Double Sided Cope & Pattern (8 cutter sets)

Standard sets cut 1/4” x 5/8” or 1/2” x 5/8” deep tongue and groove. Mini- Pro is not to be used on 1/2” spindle. These 8 piece cutter sets are built to cut both 1-3/8” passage doors and 1-3/4” entry doors simply by changing the center cutters. A 2 piece glass panel groover set is also available to run with these sets (See Optional Glass Panel Groovers).

Optional Glass Panel Groovers (2 cutter sets)

Raised Panel Shaper Cutters (3/4" material)

Freeborn raised panel cutters are manufactured with 15º SHEAR to produce optimum cuts both with and across the grain. Counterclockwise rotation with wood fed face up.

Raised Panel Shaper Cutters (1/2" material)

Manufactured with 15º SHEAR to produce optimum cuts both with and across the grain. Counterclockwise rotation with wood fed face up. These raised panel cutters cut a 1-3/8” reveal plus a 3/8” long tongue. Reduce production time by adding an opposite rotation cutter to those above, and produce double sided raised panels in a single pass. Opposite rotation cutters are made to order. Please allow 7-10 days. PRO-LINE Cutters Only.

Raised Panel Shaper Cutters (5/8" material)

Freeborn raised panel cutters are manufactured with 15º SHEAR to produce optimum cuts both with and across the grain. Counterclockwise rotation with wood fed face up.

Back Cutters - Raised Panel (3/4" material)

Raised Panel Tongue Trimmer

Door Edge Detail Shaper Cutters

Whether it is a 30º back bevel, fingerpull, 3/8” offset, or flush overlay door, we offer a wide selection to choose from. Counterclockwise rotation with wood fed face up. For more profiles go to Door Edge Details page.

Door Edge Detail Bevel Cutters

Whether it is a 30º back bevel, fingerpull, 3/8” offset, or flush overlay door, we offer a wide selection to choose from. Counterclockwise rotation with wood fed face up. For more profiles go to Door Edge Details page.

Bead Cutters

Table Saw Bead Cutters

Door Edge Details (32mm hinge system)

Manufactured with 15º SHEAR to produce optimum cuts both with and across grain. Counterclockwise rotation with wood fed face up. Any top cutter is designed to nest and run with any bottom cutter.

Drawer Lock Cutter

Run drawer front face up in horizontal position over the top of the cutter. Drawer sides are run on end in a vertical position against the shaper fence. Made to cut up to 3/4” drawer sides. Counterclockwise rotation only.

Matched Drop Leaf

Counterclockwise rotation with wood face down. When running counterclockwise, cove cut is made by lowering shaper spindle to cut with the top half of the cutter. Bead cut is made by raising shaper spindle to cut with the bottom half of the cutter.

Reversible Glue Joint

Creates an incredibly strong joint by interlocking the glue surfaces.

V-Paneling Shaper Cutter Set (3/4" to 1" material)

The V-Paneling set consists of 5 cutters and 1 spacer to perform these 4 functions. Counterclockwise rotation with wood fed face down.

7-Piece Flooring Set (3/4" to 1" material)

The flooring set consists of 6 cutters and 1 spacer to perform 5 functions. Cut provides a loose fit (.030) for wood expansion. Set up instructions included. Counterclockwise rotation with wood fed face down.

5-Piece Flooring Set with Nail Slot

This set includes 5 cutters to perform the cut as shown. Counterclockwise rotation with wood fed face down. Up to 1” material.

8-Piece Flooring / V-Paneling Set

For 1/2" Material.

Quater Cove Convex Cutters

Counterclockwise rotation with wood fed face down.

Reversible Pattern Detail

After machining two pieces of wood, one piece may be inverted and plugged into its mate, forming a matched joint. Counterclockwise rotation with wood fed face up.

Straight Top Groovers

Straight Top Groovers are ideal for cutting grooves, rabbets, and for flush trimming.

Half Round Convex Shaper Cutters

Half Round Concave Shaper Cutters

All Concave Cutters have .030” flare for easy bull nosing.

Corner Rounding Shaper Cutters

Larger PRO-LINE Cutters exceed the standard 4” diameter. Counterclockwise rotation with wood fed face down.

Window Sash Cutter Set (4 cutter set)

These window sash profiles are common in many older homes. They are made to cut stock up to 1-3/4”. Counterclockwise rotation with wood fed face down.

Double Tongue & Groove Lock Mitre Cutter

Counterclockwise rotation only. Mini-Pro is made to run only on 3/4” spindle. Part B is run flat in horizontal position on shaper table. Part A is run in a vertical position against the shaper fence (see diagram).

Single Tongue & Groove Lock Mitre Cutter (3 cutter set)

Counterclockwise rotation only. Mini-Pro is made to run only on 3/4” spindle. Material to 1-1/8”. Part A and B are both run flat in horizontal position on shaper table. Part B is run again on table saw to cut groove (see diagram).

1-Piece Double Easing Cutters

4-Piece Expandable Double Easing Set

Each set includes 2 cutters and 2 spacers to cut 3/4”, 1”, 1-1/4” and 1-1/2” material.

Extended Quater Rounds

Freeborn Insert Tooling

Insert tooling with Freeborn quality, designed for accuracy and ease of use. Our insert tooling features the following benefits: • Common minor diameters and verticle profile centering. With these two features you do not need to adjust the spindle height or fence position when switching from cope to pattern cuts. • Easy indexing when replacing tips. Using a locating button on all sets, and a locking gib system for the cope and pattern sets and detail sets, changing tips is a quick and accurate process. • Cope and Pattern bodies will accept both square and eased edge tips • Dedicated bodies for each profile ensure maximum safety and accuracy.

Freeborn Accessories

Ball Bearing Rub Collars • Rub Spacers for Cope and Pattern • T-Bushings • Spacers and Shims